A practical way to prevent or cope with leaks and seepage in buildings is with waterproofing. The purpose of using waterproofing is nothing but protecting and maintaining the resistance of building structures. Usually, this building protection is installed in certain parts such as the basement (underground), roofs, and other wet areas. It is important to choose the right type of waterproofing considering that leakage of houses and buildings is a very serious problem and affects the cost of repairs that can be high. It is why using a professional roofing company Hickory NC service is the best way to fix your roof.
The coating system or coating is a water-based protection system. There are times when this one system is also made from cement. In use, it is necessary to mix cement with a liquid solution. After the two are well mixed, it can be applied directly to the leaking area. The waterproofing membrane takes the form of sheets or rolls. Based on the manufacturing material, it can be divided into two, namely fiber and polyester. The membrane work method is relatively more complicated, namely by heating, burning/torching, and laminating with glue. There are three types of textures on the waterproofing membrane, namely those with smooth surfaces, sand-coated and stone-coated. In using this type of waterproofing, you need to be careful because if it’s a little wrong, the risk of leakage will still occur. Usually, the use of waterproofing is used for concrete structures or roofs.
Integral waterproofing is a type of product that is generally mixed with concrete before it is cast so that it can be said to be part of the concrete mixture. With this system, basements, water reservoirs, swimming pools, and others will be more plastic, watertight, less prone to cracking, and harder with up to 30% water savings. The last one is waterproofing that is applied to concrete surfaces either with a positive or negative system or mixed into concrete that has not been cast so that the concrete floors and walls become waterproof. The active components in this waterproofing will enter and seep into the pores of the concrete, the reaction results turn into crystals permanently so that the concrete cannot be penetrated by water.