For Windowscewebring Lovers

How To Safely Jump-Start Your Car Battery

How To Safely Jump-Start Your Car Battery

After finding the battery position, follow the location of the + and -. You can start doing car battery jumpers by taking into account the following installation sequence. Meanwhile, here is jumper cable review that you may also want to read.

First, pinch the tip of the red or positive cable clamp on the positive (+) pole of the breaking car battery. After that, pinch the other end of the clamp from the red or positive cable on the positive pole (+) of the working car battery. Ensure that the two (+) pole clamps are firm and not easily detached.

The next step, pinch the tip of the black or negative cable clamp on the negative pole (-) of the working car battery. Then, the other clamp ends of the black cable or (-) are clamped to the body, chassis or other metal parts of the breaking car.

Most importantly, never connect the black or negative cable clamp to a dead battery because it is dangerous. People usually use this method which is considered to be a maximum stun flow for fishing live car engines. In fact, dead batteries can emit flammable gas when exposed to sparks.

Wait for one minute or more, depending on how long the battery is empty. You may need to let the engine run for a few minutes to charge the cool battery. Let the cable still be installed in both cars even though the car is on.

If the engine is still difficult to turn on or even there is no reaction at all, try to leave it for a while for the process of charging more energy.

After the engine of the car that has been broken has been turned on successfully, you can remove the jumper cable. The release sequence starts with the black (-) clamp tip on the car with the battery, then releases the other end of the (-) cable. After that, the cable ends (+) in the same way.